Mail
Site Map
 
 
 
 
 
 
 
Search :
 
 


 
 

PRS Solutions has been in the forefront for developing a wide range of high productivity insulation solutions for coil manufacturers to enable them to reduce the cycle time for production. This range includes a variety of self-adhesive tapes as well as B-stage products. Given below are some of the products, which have found applications in coil as well as transformer industries.


Please click on the product link to view specifications.

Product Description Application
P-253 Transparent polyester film coated on one side with transparent rubber based adhesive
- For end holding applications.
- As final layer of insulation on Coils
P-256 Y Transparent polyester film coated on one side with yellow rubber based adhesive
- For end holding applications.
- As final layer of insulation on Coils
P-248 N Polyester film laminated to polyester fleece and coated uniformly on one side with acrylic adhesive
- For harnessing purposes.
- Final layer of insulation.
P-286 Nomex paper coated with adhesive on one side.
- For end holding of slot insulation paper in Motor slots.
- As final layer of insulation on Bobbins and Coils.
P-301
(Coilgrip)
B-stage, resin-rich, glass fabric tape.
- Used as interlayer insulation or final layer insulation for low voltage Coils.
P-577
(Coilwrap)
Non woven polyester fabric coated with B-stage resin on one side and pressure sensitive adhesive on other side.
- Used as interlayer or final layer insulation for medium voltage Coils.
P-579
(Bobhold)
Non woven polyester backing impregnated with electrical grade resins.
- Used as interlayer or final layer insulation for medium voltage Coils.
P-871
(Promex Tape 3A)
High strength Promex paper coated with acrylic adhesive with siliconised paper as interliner.
- For electrical insulation of Bobbins and Coils at continuous operating temperature of 155°C.
- For end holding of slot insulation paper in Motor slots.
- As final layer of insulation on Bobbins and Coils.
P-873
(Promex Tape 3S)
High strength Promex paper coated with silicone adhesive with embossed PVC as interliner.
- For electrical insulation of Bobbins and Coils at continuous operating temperature of 180°C.
- For end holding of slot insulation paper in Motor slots.
- As final layer of insulation on Bobbins and Coils.

Note:
1) All the above products have a shelf life of 1 year at an storage temperature of 20°C + 2°C except for P-301, P-577 and P-579 which have a shelf life of 6 months at an storage temperature of 20°C + 2°C
2) Standard widths are 2.5cm. Special widths can be supplied as per your requirements and should be confirmed with us in advance.

Product

Length (Metres)

Maximum Width (Cms)

P-253

65

70

P-256Y

65

70

P-248N

25

70

P-286

25

45

P-301

55

70

P-577

25

45

P-579

25

70

P-871

25

45

P-873

25

45

Tolerances in width are + 0.5 cm

Legal Information | Privacy Policy