Mail
Site Map
 
 
 
 
 
 
 
Search :
 
 


 
 

PRS Solutions has been a pioneer in developing custom-based solutions, for a variety of motor manufacturers, rewinders and end users, for both low-voltage applications as well as high-voltage applications in AC and DC motors.

PRS Solutions can provide customised insulation schemes, depending on specific insulation requirements and design of the electrical motors, for all temperature classes. Given below are the insulation products, which are a part of the PRS Solutions insulation schemes for electrical motors.

Please click on the product link to view specifications.

Product Description Application
P-379
(Glassica)
Glass cloth backed mica tape using epoxy resin as binder
- Used as Outerwrap of Stator coils in Traction Motors.
Glassica AC Flexible, Impregnable glass backed uniform mica tape
- As Outerwrap insulation of the conductors used for stator coils of AC Traction Motors
P-336
(Slotica)
Polyimide film backed uniform mica tape having silicone resin binder with special coat
- Used as Outerwrap of Armature coils of Traction Motors.
P-898
(Promide Pel 5)
Duplex laminate of Promex paper and polyimide film with special release coat on one side.
- As slot insulation in Traction Motors.
- As Interturn insulation and Interphase insulation in Motors.
P-899
(Promide Pel 7)
Triplex laminate of Promex paper and polyimide film with special release coat on one side.
- As slot insulation in Traction Motors.
- As interturn insulation and Interphase insulation in Motors.
P-886
(Promide 10)
Triplex laminate of Promex with Polyimide film.
- As slot insulation in Traction Motors.
- As Interturn insulation and Interphase insulation in Motors.
P-879
(Promide 12)
Triplex laminate of Promex with Polyimide film.
- In all Motors and Coils as Slot liners for Class H Insulation.
- · As Interturn Insulation
- · As Interphase Insulation in Rewinding shops
P-877
(Promar 10)
Triplex laminate of Promex with polyester film
- In all Motors and Coils as Slot liners for Class F Insulation.
- As Interturn Insulation.
- As Interphase Insulation in Rewinding shops.
P-878 (Promar 12) Triplex laminate of Promex with polyester film
- In all Motors and Coils as Slot liners for Class F Insulation.
- · As Interturn Insulation.
- · As Interphase Insulation in Rewinding shops.
P-381
(Intercem)
Insulation paper impregnated with B-stage epoxy resin and laminated to polythene film
- Used as Interturn insulation for Stator coils of DC Traction Motors.
P-341
(Slotpel)
Nomex paper coated with mould lubricant on one side.
- Used as slot liner in armature coil or Stator coil of Traction Motors.
P-883
(Namipel 21)
Polyimide film coated on one side with friction coating and release coating on other.
- Used as primary insulating film of individual conductors, with friction coating enhancing varnish absorption and retention capabilities of the film.
P-884
(Amipel 22)
Polyimide film coated uniformly with release coating on both sides.
- Used as sacrificing film for varnishing of individual copper conductors during coil manufacturing of Traction Motors and High voltage coils.
P-571 Red silicone self-fusible tape using polyester film as interliner.
- Used for insulation of Interconnectors of Stator coils of Traction Motors.
- Used for Busbar insulation.
P-369
(Conniflex BM FR)
Fibre glass cloth coated on both sides with silicone based elastomer and bias cut at an angle of 45 degrees
- As a fire circuit breaker.
- As overhang insulation
P-291 PTD 1mil Polyimide film coated on one side with silicone adhesive
- Used for HT Insulation of Busbar.
- Used in the inside part of control panel door of Busbar.
- To prevent short circuit due to Arcing.
P-298 2 mil Polyimide film coated uniformly with Silicone adhesive
- Used for HT Insulation of Busbar.
- Used in the inside part of control panel door of Busbar.
- To prevent short circuit due to Arcing.

Note:
1) The above products have a shelf life of 1 year at an storage temperature of 20C + 2C
2) The standard sizes are as below. Please note that Promide 10, Promide 12, Promar 10, Promar 12, Promide Pel 5 and Promide Pel 7 is supplied in units of Kgs. These products are available in a maximum width of 45 cms.

Product

Width (Cms)

Length (Metres)

Maximum Width (Cms)

Glassica

2.5

30

45

Glassica AC

2.5

30

45

Slotica

2.5

30

45

Intercem

44

33

70

Slotpel

52

20

70

Namipel 21

2.5

25

45

Amipel 22

2.5

25

45

P-571

2.5

25

2.5

Conniflex BM FR

2.5

25

70

P-291 PTD

2.5

25

45

P-298

2.5

25

45

Tolerances in width are + 0.5 cm

 

Legal Information | Privacy Policy